wiki:SpiderLing

Version 14 (modified by admin, 3 years ago) ( diff )

Changelog

SpiderLing

SpiderLing — a web spider for linguistics — is software for obtaining text from the web useful for building text corpora.

Many documents on the web only contain material not suitable for text corpora, such as site navigation, lists of links, lists of products, and other kind of text not comprised of full sentences. In fact such pages represent the vast majority of the web. Therefore, by doing unrestricted web crawls, we typically download a lot of data which gets filtered out during post-processing. This makes the process of web corpus collection inefficient.

The aim of our work is to focus the crawling on the text rich parts of the web and maximize the number of words in the final corpus per downloaded megabyte. Nevertheless the crawler can be configured to ignore the yield rate of web domains and download from low yield sites too.

Paper | Cite | Licence

Get SpiderLing

Download ​the latest version. Please note the software is distributed as is, without a guaranteed support.

Publications

Chapter 1 in Vít Suchomel's Ph.D. thesis (defended in 2020):
​Better Web Corpora For Corpus Linguistics And NLP

We also presented our results at the following venues:

​Efficient Web Crawling for Large Text Corpora
by Jan Pomikálek, Vít Suchomel
at ​ACL SIGWAC Web as Corpus (at conference WWW), Lyon, April 2012

​Large Corpora for Turkic Languages and Unsupervised Morphological Analysis
by Vít Baisa, Vít Suchomel
at ​Language Resources and Technologies for Turkic Languages (at conference LREC), Istanbul, May 2012

​The TenTen Corpus Family
by Miloš Jakubíček, Adam Kilgarriff, Vojtěch Kovář, Pavel Rychlý, Vít Suchomel
at ​7th International Corpus Linguistics Conference, Lancaster, July 2013.

Large textual corpora built using SpiderLing

From 2017 to 2020

Corpora of total size of ca. 200 billion tokens in various languages (mostly English) were built from data crawled by SpiderLing from 2017 to March 2020.

Table source: Page 128 of Suchomel, Vít. "Better Web Corpora For Corpus Linguistics And NLP." Dissertation thesis, Masaryk university, 2020.

From 2011 to 2014

language raw data size [GB] cleaned data size [GB] yield rate corpus size [billion tokens] crawling duration [days]
American Spanish 1874 44 2.36% 8.7 14
Arabic 2015 58 2.89% 6.6 14
Bulgarian 0.9 8
Czech ~4000 5.8 ~40
English 2859 108 3.78% 17.8 17
Estonian 100 3 2.67% 0.3 14
French 3273 72 2.19% 12.4 15
German 5554 145 2.61% 19.7 30
Hungarian 3.1 20
Japanese 2806 61 2.19% 11.1 28
Korean 0.5 20
Polish 9.5 17
Russian 4142 198 4.77% 20.2 14
Turkish 2700 26 0.97% 4.1 14

Requires

Runs in Linux, tested in Fedora and Ubuntu. Minimum hardware configuration (very small crawls):

  • 4 core CPU,
  • 8 GB system memory,
  • some storage space,
  • broadband internet connection.

Recommended hardware configuration (crawling ~30 bn words of English text):

  • 8-32 core CPU (the more CPUs the faster the processing of crawled data),
  • 32-512 GB system memory

(the more RAM the more domains kept in memory and thus more webs visited),

  • lots of storage space,
  • connection to an internet backbone line.

Includes

A robot exclusion rules parser for Python (v. 1.6.2)

  • by Philip Semanchuk, BSD Licence
  • see util/robotparser.py

Language detection using character trigrams

  • by Douglas Bagnall, Python Software Foundation Licence
  • see util/trigrams.py

docx2txt

  • by Sandeep Kumar, GNU GPL 3+
  • see util/doc2txt.pl

Installation

  • unpack: tar -xJvf spiderling-src-*.tar.xz,
  • install required tools, see install_rpm.sh for rpm based systems
  • check importing the following dependences by pypy3/python3: python3 -c 'import justext.core, chared.detector, ssl, lxml, re2' pypy3 -c 'import ssl; from ssl import PROTOCOL_TLS'
  • make sure the crawler can write to config.RUN_DIR and config.PIPE_DIR.

Settings -- edit util/config.py

  • !!!IMPORTANT!!! Set AGENT, AGENT_URL, USER_AGENT;
  • set MAX_RUN_TIME to specify max crawling time in seconds;
  • set DOC_PROCESSOR_COUNT to (partially) control CPU usage;
  • set MAX_OPEN_CONNS, IP_CONN_INTERVAL, HOST_CONN_INTERVAL;
  • raise ulimit -n accoring to MAX_OPEN_CONNS;
  • then increase MAX_OPEN_CONNS and OPEN_AT_ONCE;
  • configure language and TLD dependent settings.

Language models for all recognised languages

  • Plaintext in util/lang_samples/,

e.g. put plaintexts from several dozens of nice web documents and Wikipedia articels, manually checked, in util/lang_samples/{Czech,Slovak,English};

  • jusText wordlists in util/justext_wordlists/,

e.g. use the Justext default or 2000 most frequent manually cleaned words, one per line, in util/justext_wordlists/{Czech,Slovak,English};

  • chared model in util/chared_models/,

e.g. copy the default chared models {czech,slovak,english}.edm to util/chared_models/{Czech,Slovak,English}

See default English resources in the respective directories.

Usage

See ./spiderling.py -h.

It is recommended to run the crawler in screen. Example: 

screen -S crawling
./spiderling.py < seed_urls &> run/out &

Files created by the crawler in run/:

  • *.log.* .. log & debug files,
  • arc/*.arc.gz .. gzipped arc files (raw http responses),
  • prevert/*.prevert_d .. preverticals with duplicate documents,
  • prevert/duplicate_ids .. files duplicate document IDs,
  • ignored/* .. ignored URLs (binary files (pdf, ps, doc, docx) which were

not processed and urls not passing the domain blacklist or the TLD filter),

  • save/* .. savepoints that can be used for a new run,
  • other directories can be erased after stopping the crawler.

To remove duplicate documents from preverticals, run 

for pdup in run/prevert/*.prevert_d
do
    p=`echo $pdup | sed -r 's,prevert_d$,prevert,'`
    pypy3 util/remove_duplicates.py run/prevert/duplicate_ids < $pdup > p
done

Files run/prevert/*.prevert are the final output.

Onion (​http://corpus.tools/wiki/Onion) is recommended to remove near-duplicate paragraphs of text.

To stop the crawler before MAX_RUN_TIME, send SIGTERM to the main process (pypy/python spiderling.py). Example: 

ps aux | grep 'spiderling\.py' #find the PID of the main process
kill -s SIGTERM <PID>

To re-process arc files with current process.py and util/config.py, run 

for arcf in run/arc/*.arc.gz
do
    p=`echo $arcf | sed -r 's,run/arc/([0-9]+)\.arc\.gz$,\1.prevert_re_d,'`
    zcat $arcf | pypy3 reprocess.py > $p
done

To re-start crawling from the last saved state: 

mv -iv run old #rename the old `run' directory
mkdir run
for d in docmeta dompath domrobot domsleep robots
do
    ln -s ../old/$d/ run/$d
    #make the new run continue from the previous state by symlinking old data
done
screen -r crawling
./spiderling.py \
    --state-files=old/save/domains_T,old/save/raw_hashes_T,old/save/txt_hashes_T \
    --old-tuples < old/url/urls_waiting &> run/out &

(Assuming T is the timestamp of the last save, e.g. 20190616151500.)

Performance tips

  • Start with thousands of seed URLs. Give more URLs per domain. It is possible to start with tens of millions of seed URLs. If you need to start with a small number of seed URLs, set VERY_SMALL_START = True in util/config.py.
  • Using PyPy reduces CPU cost and may cost more RAM.
  • Set TLD_WHITELIST_RE to avoid crawling domains not in the target language (it takes some resources to detect it otherwise).
  • Set LOG_LEVEL to debug and set INFO_PERIOD to check the debug output in *.log.crawl and *.log.eval to see where the bottleneck is, modify the settings accordingly, e.g. add doc processors if the doc queue is always full.

Known bugs

  • Domain distances should be made part of document metadata instead of storing them in a separate file. It will be resolved in the next version.
  • Processing binary files (pdf, ps, doc, docx) is disabled by default since it was not tested and may slow processing significantly. Also, the quality of the text output of these converters may suffer from various problems: headers, footers, lines breaked by hyphenated words, etc.
  • Compressed connections are not accepted/processed. Some servers might be discouraged from sending an uncompressed response (not tested).
  • Some advanced features of robots.txt are not observed, e.g. Crawl-delay. It would require major changes in the design of the download scheduler. A warning is emitted when the crawl delay < config.HOST_CONN_INTERVAL.

Support

There is no guarantee of support. (The author may help you a bit in his free time.) Please note the tool is distributed as is, it may not work under your conditions.

Acknowledgements

The author would like to express many thanks to Jan Pomikálek, Pavel Rychlý and Miloš Jakubíček for guidance, key design advice and help with debugging. Thanks also to Vlado Benko and Nikola Ljubešić for ideas for improvement.

This software is developed at the ​Natural Language Processing Centre of Masaryk University in Brno, Czech Republic in cooperation with ​Lexical Computing, ​corpus tool company.

This work was partly supported by the Ministry of Education of CR within the LINDAT-Clarin project LM2015071. This work was partly supported by the Norwegian Financial Mechanism 2009–2014 and the Ministry of Education, Youth and Sports under Project Contract no. MSMT-28477/2014 within the HaBiT Project 7F14047.

Contact

'zc.inum.if@2mohcusx'[::-1]

Licence

This software is the result of project LM2010013 (LINDAT-Clarin - Vybudování a provoz českého uzlu pan-evropské infrastruktury pro výzkum). This result is consistent with the expected objectives of the project. The owner of the result is Masaryk University, a public university, ID: 00216224. Masaryk University allows other companies and individuals to use this software free of charge and without territorial restrictions under the terms of the ​GPL license.

This permission is granted for the duration of property rights.

This software is not subject to special information treatment according to Act No. 412/2005 Coll., as amended. In case that a person who will use the software under this license offer violates the license terms, the permission to use the software terminates.

Changelog

Changelog 1.3 → 2.0

Major bugfixes

  • ignored redirection to path + "/" fixed
  • binary files discard fixed (text extraction from pdf, doc,... works now)

Major updates

  • multilingual webiste support (see util/config.py)
  • keeping near-good or even bad paragraphs allowed

Minor updates

  • machine translation filter (based on some known MT identifiers in HTML)
  • extract text from ODF format (.odt files)
  • get file type from Content-Type from the HTTP header
  • add HTTP Last-Modified date to prevertical
  • Justext classification added to paragraph attributes

Changelog 1.1 → 1.3

  • decode IDNA hostnames in prevertical
  • adding URLs to download on-the-fly enabled
  • bugfixes

Changelog 1.0 → 1.1

  • Important bug fix: Store the best extracted paragraph data in process.py. (Fixes a bug that caused Chared model for the last tested language rather than the best best tested language was used for character decoding. E.g. koi8-r encoding could have been assumed for Czech documents in some cases and when the last language in config.LANGUAGES was Russian.) Also, chared encodings were renamed to canonical encoding names.
  • Encoding detection simplified, Chared is preferred now
  • Session id (and similar strings) removed from paths in domains to prevent downloading the same content again
  • Path scheduling priority by path length
  • Memory consumption improvements
  • More robust error handling, e.g. socket errors in crawl.py updated to OSError
  • reprocess.py can work with wpage files too
  • config.py: some default values changed for better performance (e.g. increasing the maximum open connections limit helps a lot), added a switch for the case of starting with a small count of seed URLs, tidied up
  • Debug logging of memory size of data structures

Changelog 0.95 → 1.0

  • Python 3.6+ compatible
  • Domain scheduling priority by domain distance and hostname length
  • Bug fixes: domain distance, domain loading, Chared returns "utf_8" instead of "utf-8", '<', '>' and "'" in doc.title/doc.url, robots.txt redirected from http to https, missing content-type and more
  • More robust handling of some issues
  • Less used features such as state file loading and data reprocessing better explained
  • Global domain blacklist added
  • English models and sample added
  • Program run examples in README

Changelog 0.82 → 0.95

  • Interprocess communication rewritten to files
  • Write URLs that cannot be downloaded soon into a "wpage" file -- speeds up the downloader
  • New reprocess.py allowing reprocessing of arc files
  • Https hosts separated from http hosts with the same hostname
  • Many features, e.g. redirections, made in a more robust way
  • More options exposed to allow configuration, more logging and debug info
  • Big/small crawling profiles setting multiple variables in config
  • Performance and memory saving improvements
  • Bugfixes: chunked HTTP, XML parsing, double quotes in URL, HTTP redirection to the same URL, SSL layer not ready and more

Changelog 0.82 → 0.85

  • Mistakenly ignored links fixed in process.py
    • the bug caused not crawling a significant part of the web
  • Multithreading issues fixed (possible race conditions in shared memory)
    • delegated classes for explicit locking of all shared objects (esp. DomainQueue)
  • Deadlock observed in the case of a large scale crawling fixed (up to v. 0.84)
  • Several Domain and DomainQueue methods were rewritten for bulk operations (e.g. adding all paths into a single domain together) to improve performance
  • External Robot exclusion protocol module rewritten
    • unused code removed
    • performance issues and bug in re fixed -- requires re2 now
  • Chunked HTTP reponse and URL handling methods rewritten (performance, bugs)
  • Justext configuration
    • more permissive setting than the justext default
    • configurable in util/config.py

Changelog 0.81 → 0.82

  • Crawling multiple languages improved
    • recognise multiple languages, accept a subset of these languages

Changelog 0.77 → 0.81

  • Improvements proposed by Vlado Benko or Nikola Ljubešić:
    • escape square brackets and backslash in url
    • doc attributes: timestamp with hours, IP address, meta/chared encoding
    • doc id added to arc output
    • MAX_DOCS_CLEANED limit per domain
    • create the temp dir if needed
  • Support for processing doc/docx/ps/pdf (not working well yet, URLs of documents are saved to a separate file for manual download and processing)
  • Crawling multiple languages (Inspired by Nikola's contribution) (not tested yet)
  • Stop crawling by sending SIGTERM to the main process
  • Domain distances (distance of web domains from seed web domains, will be used in scheduling in the future)
  • Config values tweaked
    • MAX_URL_QUEUE, MAX_URL_SELECT greatly increased
    • better spread of domains in the crawling queue => faster crawling
  • Python --> PyPy
    • scheduler and crawler processes dynamically compiled by pypy
    • saves approx. 1/4 RAM
    • better CPU effectivity not so visible (waiting for host/IP timeouts, waiting for doc processors)
    • process.py requires lxml which does not work with pypy (will be replaced by lxml-cffi in the future)
  • Readme updated (more information, known bugs)
  • Bug fixes

Attachments (1)

Download all attachments as: .zip